The distance between a wireless router and your device could disrupt the iPhone signal. The Wi-Fi reception gets weaker with each distance made. It is suggested to move in closer proximity to the source of your Wi-Fi reception, while checking if the strength of the signal gets better.
The distance factor is just one consideration – there are other factors to consider as well, for instance, the Wi-Fi interruptions and software related factors. It could even be the hardware damage that disrupts the Wi-Fi signal on your iPhone XR.
What to do when you counter such issues on your iPhone XR?
Let’s take a walk together.
Turn the network equipment off and then on
This process is known as power cycling. Just like smartphones, power cycling of this equipment is necessary because there is a potential that these devices, for example, modem and wireless routers also give into system crashes and random firmware errors.
There are numerous symptoms that could transpire to interconnected devices. It could range from WiFi drops (intermittent connection) to no internet connection, or slow internet. It is prescribed to power cycle or turn OFF and then ON your device.
Turn it off for at least 30 seconds, just like you reboot your computer or reset your device. This act will eliminate any firmware errors causing the modem or router to mess up or trigger weak Wi-Fi on your phone.
- Toggle off the power button on your wireless router once you have located the power switch.
- Unplug the AC adapter for at least 1 minute or minimum 30 seconds.
- Turn the device back ON when the time has elapsed.
- Let’s wait until your Wi-Fi signal indicator is stable.
Wait for your phone to revert back to the Wi-Fi network connection. Test if the bug has been fixed. Reboot your iPhone XR as a last resort.
Mess with your Airplane mode
Resort to perform the Airplane mode trick. It is alternative to power cycling your WiFi connections on your phone. Try these steps:
- Tap on Settings from your home screen and select airplane mode (you can see an airplane symbol).
- Turn ON this airplane feature. This will switch off your Bluetooth and Wi-Fi option by default.
- Once the airplane mode has been enabled, turn off your iPhone.
- Turn back this Airplane mode ON.
- Hold on till your iPhone boots up.
- Go to settings from your home screen and airplane mode, turn the feature ON.
- Wait till your Wi-Fi network connects, then check the signal strength.
Reconnect: Forget your Wi-Fi network
Phone connects to your Wi-Fi network by default, and could even connect to unsecured WiFi networks such as your neighbor’s network. Despite the connection, you may notice the signal strength getting weaker.
Tip – forget all saved WiFi networks, here’s how to do it:
- Tap on settings from your home screen and select Wi-Fi.
- Tap the “i” from the information icon next to the WiFi networks or the list you want to forget.
- Tap on the Forget this network option.
- Tap on forget to confirm – you can also select the Wi-Fi network that you want to delete.
- Delete all the save Wi-Fi networks.
Reset the network settings
Apply this option when the aforementioned has failed. This will have an impact on the current bluetooth and Wi-Fi connections, similar server settings, APN and restoring the default networks.
Here’s how to reset network settings:
- Navigate settings option from your home screen and select general.
- Tap reset (scroll down to find the keyword reset in general settings).
- Enter the passcode/PIN/pattern etc when you tap on the reset network setting option and confirm reset option.
Your XR version will instigate the network resetting settings and restore the options that are default. Once the reset has been completed, the device will be rebooted automatically in order to apply the changes you have made. Go to your wi-Fi settings to reconnect it (after re-enabling it) once the device boots up.
Reboot your iPhone XR Network as the last resort [Soft Reset]
This case is also applicable when the response of your iPhone to your network connection is fine initially but it starts acting up next moment, this means there are miscellaneous glitches impairing the performance of your iPhone’s signal system.
Here’s how you can soft reset it:
- Simultaneously hold the power and volume buttons for few seconds.
- You can see a slide to power off option as soon as you release the buttons → drag it to the right.
- Press Slide Button again once the phone boots up after 30 seconds.
For soft network reset try:
- Go to Wi-Fi menu after tapping on settings option and enable Wi-Fi if required.
- Select Wi-Fi network and add password, if prompted.
- Tap connect and see if the problem has been resolved.
Miscellaneous factors affecting the signal connections
- Make sure you have the later iOS version – the latest software update can fix Wi-Fi signal issues. This will also fix interrelated bugs and system errors. There’s a possibility that you may miss to view and download over-the-air updates because of your Wi-Fi interruptions on your iPhone. The synonym to this problem would be to use iTunes on your desktop version to check for the latest update. You can then download and install it.
- Thank you, iTunes! A master or factory reset may help clear out issues like connection errors and you can reset and restore your device through iTunes. You can restore the factory defaults and install the latest iOS update on your iPhone XR.
- Is your network reliable? There could be unscheduled or unposted outage problems other than device issues. You can call your provider and troubleshoot further. They can also reset your wireless router from their end if needed. Refresh once the desired actions have been performed and here you go!
BONUS – Manual DNS Setup on iPhone
This creates a massive impact, it is not always Wi-Fi reception but other issues like altering the DNS setting that would fix your issue. This is not a method to boost your Wi-Fi reception but a way to go through some other DNS to obtain data from the internet.
Here are few options and how to do it:
- Navigate to settings and tap on Wi-Fi and the ‘i’ icon to the right of Wi-Fi network connected name.
- Tap DNS and enter the DNS addresses:
– Google – 22.214.171.124; 126.96.36.199
– OpenDNS – 188.8.131.52; 184.108.40.206
- Restart the Wi-Fi.
This is the optimal thing, where automatically opted DNS does not always work, which is why using an OpenDNS (public version) or Google is suggested.
Hope this issue is now resolved and you are enjoying a better Wi-Fi connection on your iPhone! Hint: these steps can fix your iPad connectivity issues as well. Let us know in the comments section. Please also make sure that certain updates or immediate updates due to COVID-19 is in response to rising cyber threats amongst which is SIM swapping. Once you embed Efani in your device, you’re free of SIM swapping threats. Remember, privacy is a fundamental right! Stay safe.